Low
Voltage Ringactuators |
Types CTC-HPSt-150/14-10/xx
no casing
Ceramic cross section:
Inner diameter:
Operating voltage:
Maximum load: |
14 x 10 mm
9 mm
150V
2000 N |
|
Ringactuator with monolithic design potential free design, insulated
ceramic endfaces Polymer coating wiring:
2 pigtails, red +, black - |
|
|
Technical Data
| Type CTC-HPSt |
stroke at
150 V (µm) |
length L
(mm) |
el. capacitance
(nF) |
stiffness
(N/µm) |
resonant frequency
(kHz) |
150/14-10/12
150/14-10/25 |
12
25 |
13.5
27 |
2900
5800 |
150
70 |
45
22 |
|
| . |
Threaded endpiece HAg:
This stainless steel endpiece can be provided for both ends of the actuator.
An additional screw cap (black anodized aluminum) is used for easy mounting of mechanical
or optical parts with diameters up to 11 mm.
Furtheron, the screwcaps can be used as mounting base for the actuators by gluing or
pressing them to a support.
Ordering code: HAg 12 x 0.5
Indicate mounting side of actuator (base near wiring or free moving end).Further
options: see section "General options"
Optics adapter 1/2":
Mounting adapter for easy mounting of 1/2 inch optics (only together with option HAg)
Positioning sensor:
Strain gauges for detecting the actuators stroke |
Types CTC-HPSt150/14
10/xx VS 22 with preloaded stainless steel casing |
|
Diameter of casing:
Inner diameter:
Operating voltage:
Polarity:
Max. load, compressive:
Preload force, max. tensile load: |
22 mm
9 mm
up to + 150 V
positive (option negative)
2000 N
300 N |
|
Moving end with screw cap for easy mounting of optical and mechanical
parts. |
|
|
Technical Data
| Type CTC-HPSt |
stroke at
150 V (µm) |
length L
(mm) |
el. capacitance
(nF) |
stiffness
(N/µm) |
resonant frequency
(kHz) |
150/14-10/12 VS22
150/14-10/25 VS22 |
12
25 |
30
43.5 |
2900
5800 |
150
70 |
20
12 |
|
| Electrical wiring: 1 m coaxial cable/BNC connector Options
See section "General options"
Optics adapter 1/2":
Mounting adapter for easy mounting of 1/2 inch optics
Adapter ring:
Ringflange for easy mounting of ringactuators in mirror mounts
Positioning sensor:
Strain gauges for detecting the actuators actual stroke |
Types CTC-HPSt-150/20-15/xx
no casing |
Ceramic cross section:
Inner diameter:
Operating voltage:
Maximum load: |
20 x 15 mm
14 mm
150V
4000 N |
|
Ringactuator with monolithic design potential free design, insulated
ceramic endfaces Polymer coating
wiring: 2 pigtails red +, black - |
|
|
Technical Data
| Type CTC-HPSt |
stroke at
150 V (µm) |
length L
(mm) |
el. capacitance
(nF) |
stiffness
(N/µm) |
resonant frequency
(kHz) |
150/20-15/12
150/20-15/25 |
12
25 |
13.5
27 |
6000
12 000 |
400
180 |
45
22 |
|
| . |
Threaded endpiece HAg:
This stainless steel endpiece can be provided for both ends of the actuator.
An additional screw cap (black anodized aluminum) is used for easy mounting of mechanical
or optical parts with diameters up to 20 mm.
Furtheron, the screwcaps can be used as mounting base for the actuators by gluing or
pressing them to a support.
Ordering code: HAg 22 x 0.75
Indicate mounting side of actuator (base near wiring or free moving end).Further
options: see section "General options"
Optics adapter 1":
Mounting adapter for easy mounting of 1/2 inch optics (only together with option HAg)
Positioning sensor:
Strain gauges for detecting the actuators stroke |
Types CTC-HPSt-150/20-15/xxm VS 35
with preloaded stainless steel casing |
|
Diameter of casing:
Inner diameter:
Operating voltage:
Polarity:
Max. load, compressive:
Preload force, max. tensile load: |
35 mm
14 mm
up to + 150 V
positive (option negative)
4000 N
500 N |
|
Moving end with screw cap for easy mounting of optical and mechanical
parts, with diameters up to 20mm. |
|
|
Technical Data
| Type CTC-HPSt |
stroke at
150 V (µm) |
length L
(mm) |
el. capacitance
(nF) |
stiffness
(N/µm) |
resonant frequency
(kHz) |
150/20-15/12 VS35
150/20-15/25 VS35 |
12
25 |
30
43.5 |
6 000
12 000 |
400
180 |
15
8 |
|
| Electrical wiring: 1 m coaxial cable/BNC connector Options
See section "General options"
Optics adapter 1":
Mounting adapter for easy mounting of 1 inch optics
Adapter ring:
Ringflange for easy mounting of ringactuators in mirror mounts
Positioning sensor:
Strain gauges for detecting the actuators actual stroke |
| Piezo-Ringactuators | Low
Voltage Ringactuators |
| High Voltage Ringactuators | General
Options |
Return To Main Menu
| Top of Page | Home
Request Information
23561 Ridge Route, Suite U, Laguna Hills, CA
92653
Toll Free: (800) 991-1420
Tel. (949) 770-9911 ~ Fax (949) 770-2492 |
